Compare
Why garage door spring quotes swing from 300 to 2000 dollars
A spring snapped and your car is stuck, so you called someone in a hurry. The number they gave you over the phone was fine, and the number on the paperwork was not. You want to know whether the figure you were just handed is a normal spring price or a markup wearing a work uniform.
Good to know
What sets the number
A spring quote is not one price, it is four prices stacked. The cycle count sets the base: torsion springs are sold by how many open and close cycles they are built for, and a higher cycle spring costs more up front because it is heavier wire. Torsion spring replacement runs from 150 to 350 dollars and extension springs from 120 to 200 dollars, with a conversion from extension to torsion at 400 to 800 dollars, and torsion springs last 7 to 14 years or 10,000 to 20,000 cycles. One spring versus two is the second number, and it is the one most people do not expect. The third is whether the job is torsion or extension, and the fourth is the coverage term. A quote that cannot name all four is a quote that made the number up.
Costs
What a spring replacement costs in Scottsdale
These are published ranges from HomeGuide and Angi, read October 24, 2026. They are for comparison, not a quote for your door.
| Job | Published range | Source |
|---|---|---|
| Torsion spring, both springs | $150 to $350 | HomeGuide, Oct 2026 |
| Extension spring, both springs | $120 to $200 | HomeGuide, Oct 2026 |
| Spring and cable together | $200 to $500 | HomeGuide, Oct 2026 |
| Torsion spring and bar | $200 to $400 | HomeGuide, Oct 2026 |
| Convert extension to torsion | $400 to $800 or more | HomeGuide, Oct 2026 |
| Double door, both springs | $300 to $600 | HomeGuide, Oct 2026 |
| Service call fee | $50 to $75 | Angi, 2026 data |
A snapped spring can take a cable with it, which is why spring and cable together are listed at $200 to $500. Evening, weekend and holiday visits carry premium charges. Every range with its source is on the garage door repair cost page.
Costs
What to write down before you agree to a spring price
Write down how many cycles the springs are built for, whether you are getting one spring or two, whether the system is torsion or extension, and what the coverage term includes and for how long. Ask whether the labor is inside the number or added on top. The single biggest trap is one spring: a door with one broken spring almost always has a second spring at the same point in its life, so a quote to replace only the broken one saves you nothing if the other lets go in a month. A number that changes the moment you say no is a number that was never tied to the work.
Good to know
What usually went wrong before the number got big
The classic pattern is a small number quoted on the phone and a big number produced in the driveway. The spring comes off fast, and then the total lands. In the stories people tell, the number drops the moment they say no, which is the tell: a real spring price does not fall by half in the time it takes to say the word. Another common move is the one spring quote that becomes a whole rebuild once the door is apart. The spring is the part that failed, but the quote keeps growing into hardware, bearings, and drums that were not mentioned until the door was already open.
Costs
When a second read on the number is worth it
If the number moved after the work started, or the price dropped the moment you said no, get a second read before you pay. Call (747) 243-2089 and we go over what a spring job should include so you can check the number against the work, not against the mood in the driveway. A spring that is honestly priced does not need a script.
5 questions
Questions people ask
Still have a question? Call (747) 243-2089 and say what the door is doing.
Why did my spring quote come in over 1000 dollars when 300 to 500 is normal?
Because the quote stopped being a spring and became a package. Torsion spring replacement runs from 150 to 350 dollars and extension springs from 120 to 200 dollars, with a conversion at 400 to 800 dollars. A number over 1000 usually has hardware, bearings, drums, or a coverage plan stacked on top of a part that only costs a fraction of that. Ask for the spring number by itself and see how much is spring and how much is padding.
Should I replace both springs or just the broken one?
Both. Springs on the same door are built for the same cycle count and were put in on the same visit, so when one lets go the other is close behind it. The labor is nearly the same either way, since the door is already apart and the work is already being done. Replacing one spring saves a little now and buys you a second visit and a second charge the next time the other one snaps, usually within months.
What is the difference between a 10000 cycle and a higher cycle spring?
Wire weight and price. A residential door system has to run a minimum of 10,000 cycles before its parts reach the end of their rated life. A higher cycle spring is heavier wire, lasts longer, and costs more up front. Spring cycle life drops when the wrong spring is chosen, it is wound wrong, or it runs hot and dry. Ask which cycle count you are buying.
Why did the price drop as soon as I said no?
Because the first number was never the price, it was an opening offer. A spring price is set by the part and the labor, and neither changes in the ten seconds it takes to say no. When a number falls by a third or more the moment you push back, the fall is the proof that the first figure was padding. A real price holds still. A number that only survives while you are not looking was never tied to the work.
What should a spring replacement include for the price?
The springs for both sides, the labor to wind them, a check of the balance and the cables, and a clear statement of what the coverage term includes and for how long. It should also say whether the work is torsion or extension, since that changes the number. If any of those lines is blank or vague, that blank is where the number will move later. A complete quote is boring, specific, and stable. That is what you want.
